Small Bluetooth amp boards compared

Small Bluetooth amp boards are the heart of most DIY portable speakers. The differences that matter in practice are input voltage, real power and what you’re driving. Figures below come from seller listings, so confirm them on the page you buy from.

BoardOutputInputGood forWatch for
ZK-502C2×50 W5–27 VSmall builds with flexible powerFull power needs about 18 V or more
MakerHawk TPA3116D22×50 W12–24 VGeneral-purpose 4 in to 6.5 in buildsA 6S pack is 25.2 V full, which can exceed a 24 V maximum
DollaTek mini2×50 W18–24 VCompact metal-case buildsA 4S pack is too low. A 6S pack can exceed 24 V when full; a tool battery is often a better fit
Hosyond 200 W2×100 W12–24 VLarge drivers and loud useFull power needs 24 V and a strong supply. Watch 6S full charge (25.2 V)
TPA31102×15 W8–24 VSmall, cool, efficient mini speakersLimited headroom in larger boxes
PAM84032×3 W3.7–5.5 VUSB-powered pocket speakersQuiet in anything bigger than 1 L
TPA32552×100 W18–48 VHigh-power builds on a 6S packOverkill for small drivers
Wuzhi ZK-1002T2×100 W9–24 VBig drivers, bass and treble knobsFull power needs 24 V. A 6S pack can exceed 24 V when full
Wuzhi ZK-1002about 2×50 W5–24 VCompact builds on many battery typesConfirm the power rating on the listing. Watch 6S full charge
Wuzhi ZK-1001U1×100 W mono9–24 VOne-speaker builds, TWS stereo pairingMono, so stereo needs two boards. Watch 6S full charge

About the Wuzhi (ZK) boards

Many of the generic Bluetooth amp boards on Amazon are Wuzhi Audio’s ZK-series designs, resold under brand names such as DAMGOO, WANGCL, diymore and Arrarown. The boards are usually the same hardware with different labels, so compare specs rather than seller names, and check each listing’s voltage range and power rating.

How to choose

Start with the driver. Pick an amp whose per-channel power is at or below the driver’s RMS rating, so a turned-up volume can’t overdrive it. Then check the pack’s empty voltage against the amp’s minimum, and the pack’s full-charge voltage against the amp’s maximum. A 6S lithium-ion pack is 22.2 V nominal but about 25.2 V full, which can damage boards rated to 24 V. Finally check impedance per channel: these boards expect 4 Ω or higher. Some builders also report a faint hiss at idle on cheap TPA3116 boards, so keep returns in mind.

Open the build planner